Skip to content Skip to navigation menu
You cannot place an order at this time, pleaseContact Us for further assistance
  • EverFlow
  • Air Dryer Module
  • Not for Sale
  • No External Market

999999 In Stock


Weights & Dimensions

Gross Weight
24.38 Kilogram
Net Weight
24.38 Kilogram

VMRS Codes / Description

013-010-421 Module - Continuous Flow, Air Dryer
Air Dryer Configuration
AD-IP / AD-IP (EverFlow) 
Ø.675 IN (2x) / .675 IN X 1.069 IN (2x) 
Supply Port
1/2-14 NPT x 1/2-14 NPT (90° Elbow) 
Governor Control Port
1/8-27 NPT 
PRI Delivery (Reservoir) Port
1/2-14 NPT x 1/2-14 NPT (Male Branch Tee) 
Purge Exhaust Port
Purge Volume
Purge Valve Type
Soft Seat 
Safety Valve Opening Pressure
200 PSI 
Power Harness Connector Type
Weather Pack 2-Way Sealed Connector (Female) 
Heater / Thermostat Rating
12V / 90W 
Heater Connector Type
Metri-Pack 280 Series 2-Way Sealed Connector (Male) 
Heater Connector Color
Cartridge Type
PuraGuard (Coalescing) 
Cartridge Thread
1 1/4-7 UNC-2B 
Clearance to Remove Cartridge
.30 IN 
Governor Included
Maximum Inlet Temperature
160 °F (71 °C) 
Minimum Operating Temperature
-40 °F (-40 °C) 
Cautionary Note(s)
Do not replace PG cartridge with Standard/GC cartridge. 

Knorr-Bremse needs your mandatory email address in order to be able to inform you about updates to this downloaded document in justified cases with regard to our legal liability obligations.


The information contained in documents found on this website is intended for the exclusive use of trained persons within the commercial vehicle industry, and must not be passed on to any third party.

All recommendations regarding products and their servicing or usage are with reference to Knorr-Bremse products and should not be considered applicable to products from other manufacturers.

This information does not purport to be all-inclusive and no responsibility is assumed as a result of its use. We cannot accept any liability nor offer any guarantee regarding data accuracy, completeness or timeliness. The information does not represent any guarantee or ensured characteristics of the Products or Systems described.

No liability can be accepted based on the information, its use, recommendations or advice provided. In no event may we be held liable for any damage or loss except in the case of willful intent or gross negligence on our part, or if any mandatory legal provisions apply.

Any legal disputes arising from the use of this information shall be subject to German law.

Note: If service work is carried out on a vehicle as a result of information taken from a document, it is the responsibility of the workshop to ensure the vehicle is fully tested and in full functional order before the vehicle is returned into service. Knorr-Bremse accepts no liability for problems caused as a result of appropriate tests not being carried out.

This disclaimer is an English translation of a German text, which should be referred to for all legal purposes.