Ir al contenidot Ir al menú de navegaciónt
No puede hacer un pedido en este momento,comuníquese con nosotros para más ayuda
Spinner
065686
  • E-6
  • Válvula de freno de pie
  • Se vende
  • Posventa (nuevo)
Comparar

999999 En stock

Spinner

Peso y dimensiones

Peso bruto
2.0 Kilogram
Peso neto
2.0 Kilogram
Longitud
173.736 Millimeter
Anchura
114.808 Millimeter
Altura
207.01 Millimeter

Códigos VRMS / descripción

013-010-051 Application Valve - Dual
Montaje (cuerpo de válvula)
5/16-18 UNC-3B (3x) 
Montaje (vehículo)
Ø .34 IN (3x) 
Placa de montaje incluida
Yes 
Incluye gurdapolvo de goma
Yes 
Configuraciónde la boca
Axial / Perpendicular 
Alimentación (11) boca 1
3/8-18 NPT 
Alimentación (11) boca 2
3/8-18 NPT 
Alimentación (12) boca 1
3/8-18 NPT 
Alimentación (12) boca 2
3/8-18 NPT 
Salida (21) boca 1
3/8-18 NPT 
Salida (21) boca 2
3/8-18 NPT (Plugged) 
Salida (22) boca 1
3/8-18 NPT 
Salida (22) boca 2
3/8-18 NPT (Plugged) 
Boca de escape
Snorkel - 3/4 Tube (90° Elbow) 
Presión diferencial
3.0 PSI 
Estilo de graduación del muelle
Rubber Spring 
Cumplimiento normativo
FMVSS 121 
BVA-85 incluido
No 
Retardador incluido
No 
Pedal incluido
Yes 
Estilo de pedal
Lever / Linkage 
Material del émbolo
Steel 
Impermeable
No 
Temperatura máxima de funcionamiento
200 °F (93 °C) 
Temperatura mínima de funcionamiento [° C]
-40 °F (-40 °C) 

Acepte el aviso de privacidad y la cláusula de exención de responsabilidades de descarga

Disclaimer

The information contained in documents found on this website is intended for the exclusive use of trained persons within the commercial vehicle industry, and must not be passed on to any third party.

All recommendations regarding products and their servicing or usage are with reference to Knorr-Bremse products and should not be considered applicable to products from other manufacturers.

This information does not purport to be all-inclusive and no responsibility is assumed as a result of its use. We cannot accept any liability nor offer any guarantee regarding data accuracy, completeness or timeliness. The information does not represent any guarantee or ensured characteristics of the Products or Systems described.

No liability can be accepted based on the information, its use, recommendations or advice provided. In no event may we be held liable for any damage or loss except in the case of willful intent or gross negligence on our part, or if any mandatory legal provisions apply.

Any legal disputes arising from the use of this information shall be subject to German law.

Note: If service work is carried out on a vehicle as a result of information taken from a document, it is the responsibility of the workshop to ensure the vehicle is fully tested and in full functional order before the vehicle is returned into service. Knorr-Bremse accepts no liability for problems caused as a result of appropriate tests not being carried out.

This disclaimer is an English translation of a German text, which should be referred to for all legal purposes.