Ir al contenidot Ir al menú de navegaciónt
No puede hacer un pedido en este momento,comuníquese con nosotros para más ayuda
Spinner
K073074
  • FCS-9700
  • Solenoide de embrague del ventilador
  • Se vende
  • Posventa (nuevo)
Comparar

999999 En stock

Spinner

Peso y dimensiones

Peso bruto
0.16 Kilogram
Peso neto
0.16 Kilogram
Longitud
59.182 Millimeter
Anchura
53.594 Millimeter
Altura
77.978 Millimeter

Códigos VRMS / descripción

042-003-024 Solenoid Valve - Fan Clutch
Montaje
Ø .440 IN 
Orientación del soporte
Left 
Tipo de conector
Metri-Pack 150 Series 2-Way Sealed Connector (Male) 
Tipo de producto
Stand-Alone 
Operación
NC - Normally Closed (Black) 
Boca de alimentación 1
1/4 PTC 
Boca de salida
1/4 PTC 
Rango de voltaje de funcionamiento
9 VDC - 16 VDC 
Rango de presión de funcionamiento
60 - 150 PSI 
Orificio de entrada
Ø .045 IN 
Orificio de escape
Ø .047 IN 
Diodo de retorno
1N4004 
Resistencia
38 ± 2 Ohms (at 70°F) 
Temperatura máxima de funcionamiento
221 °F (105 °C) 
Temperatura mínima de funcionamiento [° C]
-40 °F (-40 °C) 
Nota (s) de advertencia
EXH must face downward/horizontal. Do not cover/paint exhaust. 

Acepte el aviso de privacidad y la cláusula de exención de responsabilidades de descarga

Disclaimer

The information contained in documents found on this website is intended for the exclusive use of trained persons within the commercial vehicle industry, and must not be passed on to any third party.

All recommendations regarding products and their servicing or usage are with reference to Knorr-Bremse products and should not be considered applicable to products from other manufacturers.

This information does not purport to be all-inclusive and no responsibility is assumed as a result of its use. We cannot accept any liability nor offer any guarantee regarding data accuracy, completeness or timeliness. The information does not represent any guarantee or ensured characteristics of the Products or Systems described.

No liability can be accepted based on the information, its use, recommendations or advice provided. In no event may we be held liable for any damage or loss except in the case of willful intent or gross negligence on our part, or if any mandatory legal provisions apply.

Any legal disputes arising from the use of this information shall be subject to German law.

Note: If service work is carried out on a vehicle as a result of information taken from a document, it is the responsibility of the workshop to ensure the vehicle is fully tested and in full functional order before the vehicle is returned into service. Knorr-Bremse accepts no liability for problems caused as a result of appropriate tests not being carried out.

This disclaimer is an English translation of a German text, which should be referred to for all legal purposes.