Ir al contenidot Ir al menú de navegaciónt
No puede hacer un pedido en este momento,comuníquese con nosotros para más ayuda
Spinner
5004050PG
  • AD-IS
  • Secador de aire
  • Se vende
  • Posventa (Remanufacturado)
Comparar

999999 En stock

Spinner

Peso y dimensiones

Peso bruto
6.216 Kilogram
Peso neto
6.216 Kilogram

Códigos VRMS / descripción

013-010-252 Air Dryer W/Drain Valves

Información principal

Clase principal
9C
Grupo principal
9C
Tipo de secador de aire
Stand-Alone 
Montaje
Mount to Purge Reservoir (Not Included) 
Boca de alimentación
1/2-14 NPT 
Boca de descarga del Governor
1/8-27 NPT x 1/4 Tube (Compression / 90° Elbow) 
Boca del embalse del Governor
1/8-27 NPT (Plugged) 
Boca de salida PRI 21
1/4-18 NPT 
Presión de apertura de salida PRI
103 PSI 
Boca de salida SEC 22
1/4-18 NPT (Plugged) 
Boca de salida AUX 1 1
1/4-18 NPT 
Boca de salida AUX 1 2
1/4-18 NPT 
Boca de salida AUX 1 3
1/4-18 NPT 
Boca de salida AUX 1 4
1/4-18 NPT 
Presión de apertura de salida AUX 1
55 PSI 
Boca de salida AUX 2
1/4-18 NPT 
Presión de apertura de salida AUX 2
85 PSI 
Boca de escape de purga
Standard 
Tipo de válvula de purga
Hard Seat 
Presión de apertura de la válvula de seguridad
153 PSI 
Clasificación del calentador / termostato
12V / 90W 
Tipo de conector de calentador
Metri-Pack 280 Series 2-Way Sealed Connector (Male) 
Color del conector del calentador
White 
Tipo de cartucho
PuraGuard (Coalescing) 
Rosca de cartucho
M39 x 1.5-6H RH 
Espacio para quitar el cartucho
1.00 IN 
Governor incluido
Yes 
Tipo de Governor
Non-Adjustable 
Presión de reenganche
110 PSI 
Presión de disparo del piloto
130 PSI 
Configuración de la válvula de protección de presión
2 in Series 
Temperatura mínima de funcionamiento [° C]
-40 °F (-40 °C) 
Nota (s) de advertencia
Pressure protection valve configs are not interchangeable. 

Acepte el aviso de privacidad y la cláusula de exención de responsabilidades de descarga

Disclaimer

The information contained in documents found on this website is intended for the exclusive use of trained persons within the commercial vehicle industry, and must not be passed on to any third party.

All recommendations regarding products and their servicing or usage are with reference to Knorr-Bremse products and should not be considered applicable to products from other manufacturers.

This information does not purport to be all-inclusive and no responsibility is assumed as a result of its use. We cannot accept any liability nor offer any guarantee regarding data accuracy, completeness or timeliness. The information does not represent any guarantee or ensured characteristics of the Products or Systems described.

No liability can be accepted based on the information, its use, recommendations or advice provided. In no event may we be held liable for any damage or loss except in the case of willful intent or gross negligence on our part, or if any mandatory legal provisions apply.

Any legal disputes arising from the use of this information shall be subject to German law.

Note: If service work is carried out on a vehicle as a result of information taken from a document, it is the responsibility of the workshop to ensure the vehicle is fully tested and in full functional order before the vehicle is returned into service. Knorr-Bremse accepts no liability for problems caused as a result of appropriate tests not being carried out.

This disclaimer is an English translation of a German text, which should be referred to for all legal purposes.