Ir al contenidot Ir al menú de navegaciónt
No puede hacer un pedido en este momento,comuníquese con nosotros para más ayuda
Spinner
K056140
  • M-40HF
  • Válvula moduladora del ABS
  • Se vende
  • Equipo original
Comparar

999999 En stock

Spinner

Peso y dimensiones

Peso bruto
0.655 Kilogram
Peso neto
0.655 Kilogram
Longitud
110.0 Millimeter
Anchura
61.0 Millimeter
Altura
105.0 Millimeter

Códigos VRMS / descripción

013-011-071 Modulator Valve - Antilock Brakes
Tipo de modulador
HF (High Flow) 
Montaje
Ø .335 IN (2x) 
Tipo de conector
Circular DIN 3-Way Connector (ISO 15170-1 Twist-Lock) 
Boca de alimentación
1/2-14 NPT 
Boca de salida
1/2-14 NPT 
Boca de escape
Adapter (without Silencer) 
Voltaje (nominal)
12 Volts 
Corriente (nominal)
4.6 A 
Ciclo de trabajo
15 sec / 5 min 
Tiempo máximo de 'encendido' del solenoide
150 sec 
Presión máxima de funcionamiento
150 PSI 
Temperatura máxima de funcionamiento
185 °F (85 °C) 
Temperatura mínima de funcionamiento [° C]
-40 °F (-40 °C) 

Acepte el aviso de privacidad y la cláusula de exención de responsabilidades de descarga

Disclaimer

The information contained in documents found on this website is intended for the exclusive use of trained persons within the commercial vehicle industry, and must not be passed on to any third party.

All recommendations regarding products and their servicing or usage are with reference to Knorr-Bremse products and should not be considered applicable to products from other manufacturers.

This information does not purport to be all-inclusive and no responsibility is assumed as a result of its use. We cannot accept any liability nor offer any guarantee regarding data accuracy, completeness or timeliness. The information does not represent any guarantee or ensured characteristics of the Products or Systems described.

No liability can be accepted based on the information, its use, recommendations or advice provided. In no event may we be held liable for any damage or loss except in the case of willful intent or gross negligence on our part, or if any mandatory legal provisions apply.

Any legal disputes arising from the use of this information shall be subject to German law.

Note: If service work is carried out on a vehicle as a result of information taken from a document, it is the responsibility of the workshop to ensure the vehicle is fully tested and in full functional order before the vehicle is returned into service. Knorr-Bremse accepts no liability for problems caused as a result of appropriate tests not being carried out.

This disclaimer is an English translation of a German text, which should be referred to for all legal purposes.